Strong Vibes Prints — print your own massager mounts

The parts

Drag to spin. All four mate through the same Strong Vibes Connect diamond.

Male

Holder

Snap-fit holder for Europe Magic Wand® models. Carries the keyed diamond boss that plugs into any Strong Vibes Connect socket.

Tested in Bambu Lab TPU for AMS or PLA Tough — ordinary PLA will crack. For a perfect fit, add a 4 cm strip of Bambu Lab non-slip tape to the lower back.

STL / STEP files →

Female

Socket 180

The default keyed socket. One diamond pocket — the boss seats in a single orientation (mod 180°) for a rigid, no-wobble mount.

STL / STEP files →

Female

Socket 30

Star socket — the diamond repeated every 30°, so the boss can seat at twelve angles for stepwise rotational mounting.

STL / STEP files →

Male

Test boss

A stand-in for the holder boss — the diamond on a round base with a real 1/4"-20 thread. Print it with a socket to bench-test the fit.

STL / STEP files →

Strong Vibes Connect v1.0.0

One mating interface, defined once, imported by every part — so the connection can never drift.

How it mates

A keyed diamond boss seats flat into a matching diamond socket and is clamped by a 1/4"-20 camera/tripod screw (9–10 mm, Bambu Lab) down the joint axis. The diamond is keyed (long axis ≠ short axis), so it seats in one orientation — rigid and repeatable.

The frozen standard

Long half-diagonal DIA_A = 11.322 mm, short DIA_B = 7.759 mm, grip band BAND_DEPTH = 2.0 mm. Read the full Strong Vibes Connect standard →

Print it

No CAD needed for this path.

Preview — spin the part above to check it's what you want.
Get an export — grab a .stl (straight into a slicer) or .step from the release folder for the holder or the sockets & boss. Blessed exports are added as they're cut, so if a folder is empty, build one from source (instructions).
Slice — open it in Bambu Studio or PrusaSlicer.
Material — Bambu Lab TPU for AMS (68D) or PLA Tough for the snap-fit holder; ordinary PLA will crack. For a perfect holder fit, add a 4 cm strip of Bambu Lab non-slip tape to the lower back. Sockets print fine in PLA Tough.
Assemble — one 1/4"-20 × 9–10 mm camera screw (Bambu Lab) clamps the joint. With the socket tapped, the screw stays captive.

Build & modify with your AI

The parts are real, parametric Python. Change a number, rebuild, print a custom fit.

paste to your AI

Open parts/holder/strong_vibes_holder.py in the strong-vibes-prints repo.
Make the boss buttress taller for strength — set boss_aspect to 1.4 —
WITHOUT changing the Strong Vibes Connect mating diamond (DIA_A / DIA_B /
BAND_DEPTH stay the standard). Rebuild, confirm is_valid, and export the STL.

Set up build123d + the OCP CAD Viewer and read the full guide in the README and AGENTS.md.